Toshiba e-studio212 - Removal and Installation of Options; MR-2020 (Automatic Document Feeder (ADF));MR-3023 (Reversing Automatic Document Feeder (RADF))

e-STUDIO182/212/242 © 2009 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 28
2.7 Removal and Installation of Options
2.7.1 MR-2020 (Automatic Document Feeder (ADF))/MR-3023
(Reversing Automatic Document Feeder (RADF))
(1) Turn the power OFF and unplug the power
cable.
(2) Remove 1 screw and take off the connector
cover.
Fig. 2-37
(3) Remove the ground wire.
Fig. 2-38
(4) Disconnect the connector.
Fig. 2-39