Toshiba e-studio212 - ADU Cover; Right Front Cover

e-STUDIO182/212/242 © 2009 TOSHIBA TEC CORPORATION All rights reserved
OUTLINE OF THE MACHINE
2 - 20
2.5.7 ADU cover
2.5.8 Right front cover
(1) Open the bypass tray.
(2) Open the ADU cover.
(3) Open the transfer unit and release the ADU
stopper on the front side.
(4) Remove 1 screw and take off the ADU
stopper on the rear side.
Note:
Be careful not to fall off the ADU cover when
the screws are removed from the ADU
stopper.
Fig. 2-18
(5) Take off the ADU cover while sliding it toward
the right.
Fig. 2-19
(1) Take off the front cover.
 P.2-18 "2.5.1 Front cover"
(2) Open the ADU cover.
(3) Pull out the drawer.
(4) Remove 2 screws and take off the right front
cover.
Fig. 2-20
ADU stopperADU stopper
ADU cover
Right front cover