Toshiba e-studio212 - Drawer Pickup Clutch

9
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO182/212/242
PAPER FEEDING SYSTEM
9 - 21
9.5.15 Drawer pickup clutch
(3) Remove 1 screw and take off the pickup
solenoid bracket.
Note:
Be sure not to drop the bushing.
Fig. 9-40
(4) Remove 1 screw and take off the pickup
solenoid from the bracket.
Fig. 9-41
(1) Take off the main motor drive unit.
 P.8-7 "8.5.3 Main motor drive unit"
(2) Take off the pickup solenoid bracket.
 P.9-20 "9.5.14 Pickup solenoid (SOL1)"
(3) Remove 1 E-ring, and take off the drawer
pickup clutch.
Fig. 9-42
Pickup solenoid bracket
Screw
Bushing
Pickup solenoid
Drawer pickup clutch
E-ring