Toshiba e-studio212 - Mixer

e-STUDIO182/212/242 © 2009 TOSHIBA TEC CORPORATION All rights reserved
DEVELOPMENT SYSTEM
11 - 18
11.6.7 Mixer
(1) Take off the developer sleeve.
 P.11-14 "11.6.6 Guide roller / Developer
sleeve"
(2) Take off the doctor sleeve.
Fig. 11-29
(3) Remove 1 screw and take off the tensioner
bracket.
(4) Remove 2 screws and take off the holder.
Fig. 11-30
(5) Remove 2 bushings and 2 oil seals from the
holder.
(Replacement of Oil seal:  P.11-20 "11.6.8
Replacement of Oil Seal")
Fig. 11-31
Doctor sleeve
Holder
Tensioner bracket
Oil seal
Bushing