Toshiba e-studio212 - Page 219

12
© 2009 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO182/212/242
FUSER / EXIT UNIT
12 - 15
12.6.3 Exit roller
(1) Take off the fuser roller unit.
 P.12-14 "12.6.2 Pressure roller unit /
Fuser roller unit"
(2) Release the latch and take off the gear-A.
Fig. 12-12
(3) Take off the gear-B.
Fig. 12-13
(4) Remove the bracket.
Fig. 12-14
Gear-A
Gear-B
Bracket