4) Cautionary Labels
- During servicing, be sure to check the rating plate and cautionary labels such as “Unplug the
power cable during service”, “CAUTION. HOT”, “CAUTION. HIGH VOLTAGE”, “CAUTION.
LASER BEAM”, etc. to see if there is any dirt on their surface and if they are properly stuck to the
equipment.
For UC
For EU
For others
Certification label (For UC)
Identification label
Warning for high-temperature areas
(
fuser unit
)
Warning for high-temperature areas
(
ventilation holes
)
Explanatory label
To Next Page
Loading...
