10
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
PAPER FEEDING SYSTEM
10 - 11
[A-3] SFB board (SFB)
(4) Pull out the hinge assembly from the bypass
tray.
Fig. 10-13
(1) Take off the hinge assembly
( P.10-10 "[A-2] Hinge assembly").
(2) Remove 3 screws, release 4 latches and 3
hooks, and take off bypass tray upper cover.
Fig. 10-14
(3) Remove 1 screw for the plate spring. And
remove 1 screw on the tray side and take off
the bracket.
Fig. 10-15
Hinge assembly
Bypass tray upper cover
Plate spring
Bracket
To Next Page
Loading...
