10
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
PAPER FEEDING SYSTEM
10 - 13
[A-5] Bypass upper guide
[A-6] Bypass pickup solenoid (SOL3)
(1) Take off the bypass feed upper cover
( P.10-12 "[A-4] Bypass feed upper
cover").
(2) Remove 4 screws and take off the bypass
upper guide.
Fig. 10-19
(1) Take off the bypass feed upper cover
( P.10-12 "[A-4] Bypass feed upper
cover").
(2) Remove 4 screws and take off the upper
plate.
Fig. 10-20
(3) Remove 1 spring. Disconnect 1 connector
and take off the bypass pickup solenoid with
the solenoid arm.
Fig. 10-21
Bypass upper guide
Upper plate
Bypass pickup solenoid
Solenoid arm
To Next Page
Loading...
