14
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
TRANSFER UNIT
14 - 17
[K] Case
(6) Take off the 2nd transfer unit.
Fig. 14-30
(1) Take off the 2nd transfer unit
( P.14-16 "[J] 2nd transfer unit").
(2) Take off the 2nd transfer roller
( P.14-15 "[I] 2nd transfer roller").
(3) Remove 2 screws and take off the pre-trans-
fer guide.
Fig. 14-31
Note:
When the pre-transfer guide is being
installed, be sure that 3 tabs of the guide
come underneath the bracket (metal plate).
Fig. 14-32
2nd transfer roller
Pre-transfer guide
05/08
To Next Page
Loading...
