2
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO281c/351c/451c
OUTLINE OF THE MACHINE
2 - 47
[B] KD-1011 (Paper Feed Pedestal (PFP))
(1) Turn OFF the power and unplug the power
cable.
(2) Remove 1 screw and take off the connector
cover of the equipment.
Fig. 2-83
(3) Remove 2 screws and take off the rear
cover-1.
Fig. 2-84
(4) Remove 3 screws and take off the rear
cover-2.
Note:
Disconnect the connector of the RADF first
when the RADF is installed.
Fig. 2-85
Connector cover
Rear cover-1
Rear cover-2
To Next Page
Loading...
