User Guide 832
Configuring System Logs Appendix: Default Parameters
4
Appendix: Default Parameters
Default settings of maintenance are listed in the following tables.
Table 4-1 Default Settings of Local Logs
Parameter Default Setting
Status of Log Buffer Enabled
Severity of Log Buffer Level_6
Sync-Periodic of Log Buffer Immediately
Status of Log File Disabled
Severity of Log File Level_3
Sync-Periodic of Log File 24 hours
Table 4-2 Default Settings of Remote Logs
Parameter Default Setting
Server IP 0.0.0.0
UDP Port 514
Severity Level_6
Status Disabled
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General