TP-Link T2500G-10TS - Page 149

139
Choose the menu Multicast→IGMP Snooping→Packet Statistics to load the following page.
Figure 9-12 Packet Statistics
The following entries are displayed on this screen:

Auto Refresh
Auto Refresh:
Enable/Disable auto refresh feature.
Refresh Period:
Enter the time from 3 to 300 in seconds to specify the auto
refresh period.

IGMP Statistics
Port Select: Click the Select button to quick-
select the corresponding port
based on the port number you entered.
Port:
Displays the port number of the switch.
Query Packet:
Displays the number of query packets the port received.
Report Packet (V1):
Displays the number of IGMPv1 report packets the port
received.
Report Packet (V2):
Displays the number of IGMPv2 report packets the port
received.
Report Packet (V3):
Displays the number of IGMPv3 report packets the port
received.