TP-Link T2500G-10TS - Page 226

216
Choose the menu Network Security→AAA→Server Group to load the following page.
Figure 12-5 Create New Server Group
Figure 12-6 Add Server to Server Group

Configuration Procedure:
1) Configure the Server Group name and Server Type to create a server group. (Figure 12-5)
2) Click edit in the Server Group List to configure the corresponding server group. (Figure
12-5)
3) Select Server IP you have previously created and click Add to add the server to the server
group. (Figure 12-6)
View and delete the configured server groups in the Server Group List.
View and delete the configured servers in the Server List.

Entry Description:
Server Group:
Define a server group with a group name.
Server Type:
Specify the server type as RADIUS or TACACS+.
Server IP
Select the IP of the server you have previously configured.