TP-Link T2500G-10TS - Page 55

45
Mirroring:
Displays the mirroring port number.
Mode:
Displays the mirror mode. The value will be "Ingress" or "Egress".
Mirrored Port:
Displays the mirrored ports.
Operation:
You can configure the mirror group by clicking Edit.
Click Edit to display the following figure.
Figure 5-3 Port Mirror Config
The following entries are displayed on this screen:

Mirror Group
Number:
Select the mirror group you want to config.

Mirroring Port
Mirroring Port:
Select a physical port from the port panel as the mirroring port.

Mirrored Port
Select:
Select the desired port as a mirrored port. It is multi-optional.
Port:
Displays the port number.