TP-Link T2500G-10TS - Page 81

71
Select
：
Select the desired entry to delete the corresponding VLAN. It is
multi-optional.
VLAN ID：
Displays the ID number of VLAN.
Name：
Displays the user-defined name of VLAN.
Members：
Displays the port members in the VLAN.
Operation
：
Allows you to view or modify the information for each entry.
• Edit: Click to modify the settings of VLAN.
•
Detail: Click to get the information of VLAN.
Click Edit button to modify the settings of the corresponding VLAN. Click Create button to
create a new VLAN.
Figure 6-4 Create or Modify 802.1Q VLAN
The following entries are displayed on this screen:

VLAN Config
VLAN ID:
Enter the ID number of VLAN.
Description:
Give a description to the VLAN for identification.
Check: Click the Check
button to check whether the VLAN ID you
entered is valid or not.