TP-Link T2500G-10TS - Page 85

75
Choose the menu VLAN→MAC VLAN to load the following page.
Figure 6-7 Create and View MAC VLAN
The following entries are displayed on this screen:

VLAN Table
MAC Address:
Enter the MAC address.
Description:
Give a description to the MAC address for identification.
VLAN ID:
Enter the ID number of the MAC VLAN. This VLAN should be one
of the 802.1Q VLANs the ingress port belongs to.

MAC VLAN Table
MAC Select:
Click the Select button to quick-select the corresponding entry
based on the MAC address you entered.
Select:
Select the desired entry. It is multi-optional.
MAC Address:
Displays the MAC address.
Description:
Displays the user-defined description of the MAC address.
VLAN ID:
Displays the corresponding VLAN ID of the MAC address.
Operation:
Click the Edit button to modify the settings of the entry. And
click the Modify button to apply your settings.
Configuration Procedure:
Step
Operation
Description
1 Set the link type for
port.
Required. On the VLAN→802.1Q VLAN→Port Config page, set
the link type for the port basing on its connected device.
2 Create VLAN. Required. On the VLAN→802.1Q VLAN→VLAN Config page, click
the Create
button to create a VLAN. Enter the VLAN ID and the
description for the VLAN. Meanwhile, specify its member ports.