116
Chapter 8 NVR Management
8. 2 Restart/Log Out/Shut Down the NVR
To restart/log out/shut down the NVR, right click on the Live View screen and click . Then, click the
corresponding buttons.
Click to reboot the NVR. Please wait when rebooting the NVR. It may take
several seconds.
Click to log out the account. After logging out, you need to enter the
password to configure and manage the device.
Click to shut down the NVR. To protect your hard disk and data, shut down
the NVR before unplugging the disk or turning off the power of NVR.
To Next Page
Loading...
