68
Chapter 4 Recording and Storage
Method 1: Via Live View
Click
on the tool bar at the bottom of the Live View screen to start or stop recording.
Method 2: Via Recording Controls
1. Right click on the Live View screen and click Recording Controls in the pop-up main menu.
2. (Optional) Select the recording stream and disk group for storage.
3. Click Recording Switch to start or stop recording.
4. Click Save after you finish the configuration.
4. 4 Manage Hard Drive
In Hard Drive Management section, you can view and customize the settings of hard drive, and choose
different detection methods to check the bad sectors and the status of the installed hard drive.
To Next Page
Loading...
