67
Chapter 4 Recording and Storage
To configure these settings, right click on the Live View screen and click Settings in the pop-up main
menu. Then go to Storage > Recording Controls and select Disk Quota. Click Save after you finish the
configuration.
Channel Displays the name of camera in this channel.
Recording Switch Start/stop recording on the selected channel.
Storage Stream
Select the stream for recording.
Main (Main Stream): The size of recording files will be larger when
selected.
Substream: The size of recording files will be smaller when selected.
Used Capacity Displays the used space of hard drive for this channel.
Recording Quota Assign the disk quota to your cameras for recording storage.
4. 3 Record Manually
You can manually start or stop recording in Live View or Recording Controls.
To Next Page
Loading...
