TP-Link VIGI NVR1016H - Page 18

14
Chapter 1 Get Started
4. Add cameras to your NVR.
Note: Here we take TP-Link Security Cameras as the example. TP-link Security Cameras have no
password in default settings.
• Add Cameras Without Passwords
1 ) Click
to add a single camera. If you want to add cameras in batches, click the check box of
cameras and click Add in Batches.
Smart Coding
Enable Smart Coding to reduce the load on the network and the size
of the file.
Plug and Play Enable Plug and Play to add cameras more conveniently in the future.
Switch to H.265
(Only for VIGI
NVR1008H,
NVR1016H)
Enable Switch to H.265 to reduce bandwidth and keep high image
quality.