24
Chapter 2 Configure Your Network Camera
3. Set a password for your cameras. You can also click the checkbox to use the preset password
settings for cameras. Click Ye s . After the cameras are added, you can view the cameras in the
Device Added list.
Add Cameras with Passwords
■ When Plug and Play Enabled
After you connect the cameras to the network device, stay in the Live View screen and wait for the NVR
to add the cameras. The cameras will be automatically added to the NVR. Then enter the passwords in
the Live View screen to verify the cameras.
You can also follow the steps below to verify the passwords.
To Next Page
Loading...
