Introduction
Copyright Protection
12
Operating instructions: Outfeed conveyor TS 4800
Version 3.6ENG, 27.01.2020
Copyright Protection
This publication must be treated as strictly confidential. It is intended only for
internal use by an authorised group of persons. and must not be disclosed to
third parties without the written approval of TRANSNORM SYSTEM GmbH.
All documents are protected within the meaning of the Copyright Protection
Act. The transfer and duplication of documents, also by way of extract, is
strictly prohibited. Non-compliance shall be prosecuted and subject to the
payment of compensation.
Service
Our service is available for technical information on our products and their
systematic application.
Please have the following information ready when contacting us with queries
or spare parts orders:
Machine type
Order/project number
Item number
You will find this information on the type identification plate of your machine.
It is located in the vicinity of the drive unit.
TRANSNORM SYSTEM GmbH type identification plate, sample
You will find our contact data at the back of these operating instructions.
To Next Page
Loading...
