Maintenance and care
Maintenance works
53
Maintenance and care
The work steps described in this chapter are to be carried out by qualified
personnel only.
Important information regarding electrical installations:
Regularly check the electrical equipment
Refasten loose connections and joints
Immediately replace damaged lines and cables
Always keep the control cabinet closed
Maintenance works
Routine maintenance is the precondition for safe operation of the machine.
Adhere to the intervals given in the maintenance schedule. Maintenance
also includes regular cleaning in accordance with the specific operating
conditions.
Motor maintenance
Electric motors are to be serviced as recommended by the manufacturer. For
detailed information, please refer to the operating instructions of the motor
manufacturer, chapter service inspection/maintenance. You will find these
documents in the enclosure of these operating instructions.
Gear unit maintenance
Gear units must be serviced according to the manufacturer's specifications.
For detailed information, please refer to the operating instructions of the
motor manufacturer, chapter service inspection/maintenance. You will find
these documents in the enclosure of these operating instructions.
Upon your request we will provide an optimised maintenance contract based
on your individual requirements. In order to guarantee the safe operation of
the machine, we recommend to make use of our TRANSNORM SYSTEM
Service at least once a year.
To Next Page
Loading...
