transnorm TS 4800 - Responsibilities of the Operating Company; Integrator

Safety
Operating conditions
16
Operating instructions: Outfeed conveyor TS 4800
Version 3.6ENG, 27.01.2020
Impermissible operating conditions
Operation of the machine is prohibited under the following circumstances:
 There are people or objects in the hazardous areas
 Safety devices are not working or have been removed
 The machine is malfunctioning or damaged
 Maintenance intervals have been exceeded
 Operating parameters have been changed without authorisation
Responsibilities of the Operating Company / Integrator
The machine safety can only be guaranteed if all required measures are
taken. The operating company/integrator is responsible for planning and
implementing appropriate measures.
These operating instructions are part of the machine. You are obligated to
pass on this document to the buyer of the machine should it be sold.
The operating company/integrator of the machine is responsible for its
safety. This applies especially to:
 The installation to form a complete machine with functioning and
compliant safety devices.
 The incorporation of the machine in such a way that no additional
danger/hazards are created.
 Protection of the life and limb of all personnel working on or at the
machine.
 Fault-free operation of the machine.
Minimising the danger of injury
Take steps to guarantee the safety of persons in the vicinity of the machine,
for example:
 Ensure that all work on the machine is carried out by qualified and
authorised personnel.
 Make sure all operators are familiar with the safety devices.
 Ensure that personnel keep the machine and its surroundings clean and
orderly at all times.
 Provide safety equipment for operating personnel. Make sure the protec-
tive clothing is worn.
 Provide instructions on how to proceed and behave in case of accidents
and emergencies.
 Clarify questions on occupational health and safety and protection of the
environment.