transnorm TS 4800 - In-Company Transportation

Transportation and erection
In-company transportation
37
The place of installation must fulfil the following conditions:
 normal atmosphere (not containing oil or gas, no corrosive components)
 ambient temperature 5 °C to +40 °C, for brief periods up to +50 °C
(max. 1 h)
 relative air humidity max. 80%
 internal set-up
 Reliably protected against moisture and precipitation.
In-company transportation
The internal transportation of the machine to its final place of erection may
be carried out with different lifting elements. Use licensed and suitable equip-
ment only.
The machine or machine parts are only permitted to be lifted on the basic
frame. If there are supporting points on the basic frame, only these points
are suitable for attaching lifting equipment. This guarantees torsion-free
transport.
Please see the delivery note for the real weight.
DANGER
Increased risk of accident due to:
Falling or slipping loads.
 Observe the maximum lifting weight and the centre of gravity of the
machine. Observe the data provided under "Auxiliary equipment."