Maintenance and repair
Spare part purchasing
57
Maintenance and repair
Spare part purchasing
Only genuine TRANSNORM SYSTEM GmbH spare parts may be used. DIN
parts may be ordered from specialised trade.
When making inquiries or placing orders, we recommend that you send a
copy of the spare parts list to our customer service department, stating the
type and amount of parts required. You will find the address at the beginning
of these operating instructions.
The spare parts list is an integral part of the technical order documentation.
The steps described in this section are to be carried out by qualified
personnel only.
Tools, equipment and supplies
Tools, equipment and supplies
Tools Auxiliary materials Equipment
Set of tools (spanner,
screwdriver, pliers etc.)
Pneumatic screwdriver Power and voltage
supply
Torque wrench, circlip
pliers
Toothed belt tension meas-
uring tool, mechanical
Compressed air supply
for cleaning
Combination wrench 10
13 14 15 17 19 22 and
24 mm
Device for lifting and lowering
the machine or parts of it
Hexagon socket wrench
22.53456 and 8 mm
Trolley, movable platforms
with automatic locking device
Hexagon socket wrench
with ball head 5 and 6 mm
Ladders, steps, pedestals on
working platforms
RAPPLON QSP 60LF
Plus heating pliers,
RAPPLON MFT60 finger
punching equipment
110/10
Assembly paste
To Next Page
Loading...
