transnorm TS 4800 - Introduction

Introduction
Purpose of the document
9
Introduction
Purpose of the document
These operating instructions enable you to safely operate the delivered
machine, defined as partly completed machinery by the EC Machinery Direc-
tive, in accordance with its intended use.
Read through these instructions carefully before commissioning the
machine. For further technical information, please refer to the order confir-
mation supplied separately.
You will find information on the following topics in the sections below:
 The safe handling of the machine
 Technical specifications
 Transporting, installing and putting the machine into operation
 Maintenance instructions
 Repairing the machine
 Fault detection and correction
 Taking the machine out of operation and disposal
Validity
These operating instructions apply to the operating company/integrator and
all persons working on or with the machine.
Illustrations
The illustrations show simplified views of the machine.
We reserve the right to carry out technical alterations in case of further
developments. If assembly is not described, it will be carried out in exactly
the opposite order to disassembly.
Due to the numerous possible system configurations of our machines,
details shown in the illustrations may differ from the machine supplied.
See the order confirmation for an exact description
of your specific machine.