Safety
Protective devices
18
Operating instructions: Outfeed conveyor TS 4800
Version 3.6ENG, 27.01.2020
Protective devices
Various covers are installed on the machine to prevent limbs being drawn in
and crushed. The protective devices and safety equipment are listed in the
following.
It is expressly prohibited to render unserviceable, bypass or remove protec-
tive devices. These devices may only be temporarily removed for mainte-
nance or repair purposes. If the purchasing contract specifies that certain
safety equipment is not included in the scope of delivery, the operating
company/integrator must assess the potential dangers in accordance with
the Machinery Directive. If it proves to be necessary to install additional
guards, especially at the infeed and transfer points, they must be installed in
accordance with applicable national regulations and guidelines.
With the machine suspended from the ceiling, safety devices, which prevent
the risk posed by falling parts, must be installed in accordance with valid
national regulations and guidelines.
Refer to the maintenance schedule for information on inspection intervals.
Overview of the protective devices
To Next Page
Loading...
