2
Operating instructions: Outfeed conveyor TS 4800
Version 3.6ENG, 27.01.2020
Product Outfeed conveyor TS 4800
Manufacturer TRANSNORM SYSTEM GmbH
Förster Str. 2
D-31177 Harsum
Tel. +49 (0) 5127 4020
Fax +49 (0) 5127 4400
info@transnorm.de
http://www.transnorm.com
Documentation Operating instructions, -TRANSLATION-
Version 3.6 ENG, 27.01.2020
Subject to modifications. All rights reserved by TRANSNORM SYSTEM
GmbH. Reprint and reproduction only with written approval.
Revision V 2.0 Completely revised edition
V 2.1 Technical data revised
V 2.2 Description revised
V 2.3 Maintenance and repair revised
V 2.4 Maintenance and repair revised
V 2.5 Drive belt replacement revised
V 2.6 Description, safety and maintenance and repair revised
V 2.7 Electric swivel roller bars added and description/maintenance
schedule revised
V 2.8 Remaining risks and safety instructions revised
V 2.9 Introduction and safety revised
V 3.0 Maintenance schedule and troubleshooting revised
V 3.1 Technical data, maintenance schedule and troubleshooting revised
V 3.2 Maintenance and repair revised
V 3.3 Maintenance and repair revised
V 3.4 Separation of the TS 4800 with electric swivel roller bars to sepa-
rate operating manual
V 3.5 Technical description revised
V 3.6 Replace swivel roller bar, alternative method added
To Next Page
Loading...
