transnorm TS 4800 - Page 23

Safety
Remaining risks regarding the machine
23
Measures for operating personnel to avert risk and prevent damage
Danger Cause Measure
Risk of
injury
Sharp-edged machine
parts
During fault clearance:
 Be alert and proceed with caution
 Avoid hectic movements
 Wear appropriate protective clothing
Rotating parts During fault clearance:
 Do not reach into rotating parts
 Wear appropriate protective clothing
 Observe warning labels on the machine
Hot electric motors  Do not touch
Incoming loads Before remedying a fault:
 Carefully observe conveyor system
 Assess whether the system needs to be
stopped due to an unclear situation
During remedying a fault:
 Keep limbs away from the conveyed loads
 Fix conveyed loads jam
 Only switch the system on again when
conveyed loads jam is fixed
Conveyed loads During operation:
 Do not reach into conveyed loads
 Observe warning labels on the machine
During remedying a fault:
 Assess whether the system needs to be
stopped due to an unclear situation
 Secure system against accidental re-start,
if necessary
 Be alert and proceed with caution
Damage to
the environ-
ment
Leaking operating
fluids
During operation:
 Inform technical personnel/shift supervisor