EasyManua.ls Logo

Trimble TX8 - Cleaning; Removing moisture; Technical support; Related information

Default Icon
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 Introduction
following steps:
– Do not subject the equipment to rough jolts or careless treatment.
– Keep the rotating mirror lens clean. Use only lens paper or other material that is designed for cleaning optical
equipment.
– Keep the instrument protected and in an upright position, preferably in the instrument case.
Do not carry the instrument while the instrument is mounted on a tripod. Doing so can damage the tribrach
screws.
– Whenever manually rotating the instrument, use a slow and steady movement.
– Do not carry the instrument by the rotating mirror. Use the handle.
– When you need extremely precise measurements, make sure that the instrument has adapted to the
surrounding temperature. Significant variations in instrument temperature can affect precision.
Cleaning
CAUTION – DO NOT use strong detergents such as benzene or thinners on the instrument or the instrument case.
Be very careful when cleaning the instrument, especially when removing sand or dust from the
mirror lens. DO NOT use coarse or dirty cloth or hard paper. Trimble recommends that you use anti-
static lens paper, a cotton wad, or a lens brush. To clean the exterior of the instrument, use a cloth
lightly dampened with water.
Removing moisture
If the instrument has been in damp weather, take the instrument indoors and remove the
instrument from the instrument case. Leave the instrument to dry naturally. If condensation forms
on the mirror lens, allow the moisture to evaporate naturally.
Technical support
If you have a problem and cannot find the information you need in the product documentation,
contact your local dealer. Alternatively, go to the Support area of the Trimble website
(www.trimble.com/support/). Select the product you need information on. Product updates,
documentation, and any support issues are available for download.
Related information
Sources of related information include the following:
l Release notes – The release notes describe new features of the product, information not
included in the manuals, and any changes to the manuals. They can be downloaded from the
Trimble website at www.trimble.com/support/.
Trimble TX8 3D Laser Scanner User Guide 20

Table of Contents