Trimble TX8 - Compensator; Auto level check

4 Software
Compensator
The Compensator, which has a vertical compensation feature, automatically level-compensates all
3D points. You can decide whether or not to apply this feature.
To activate the compensator:
1.
In the Leveling panel of the Leveling dialog (see page 68), ensure that the Disable compensator
option is cleared.
2.
Tap to return to the Leveling dialog or tap to return to the main menu.
To deactivate the compensator:
1. In the Leveling panel of the Leveling dialog, select the Disable compensator option.
2.
Tap to return to the Leveling dialog or tap to return to the main menu.
Auto level check
The Tilt component in your instrument is a dual-axis detector (Trunnion and Sighting axes).
Activating the Auto Level Check
1. In the Scanning panel of the Leveling dialog (see page 68), select the Auto level check option.
2.
Tap or to return to the main menu.
Deactivating the Auto Level Check
1. In the Scanning panel of the Leveling dialog (see page 68), ensure that the Auto level check
option is not selected.
2.
Tap or to return to the main menu.
Trimble TX8 3D Laser Scanner User Guide 71