Trimble TX8 - Page 3

FCC Declaration of Conformity
We, Trimble Navigation Limited.
935 Stewart Drive
PO Box 3642
Sunnyvale, CA 94088-3642
United States
+1-408-481-8000
Declare under sole responsibility that DoC products comply
with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
EC Declaration of Conformity
We, Trimble (MENSI S.A.S.)
174 avenue du Maréchal de Lattre de Tassigny
94120 Fontenay-sous-Bois
France
Declare under sole responsibility that the product, Trimble
TX8, part number 28000034 is in conformity with the
following European standards:
Electromagnetic Compatibility
:
Standard NF EN 61326-1 (July 2006)
In compliance with EMC Directive 2014/30/EU.
In compliance with Machinery Directive 2006/42/EC.
In compliance with RoHS Directive 2011/65 (RoHS).
Environment: Electrical equipment for measurement, control
and laboratory use
Conformity has been demonstrated on one production
representative sample. Conformity to EMC standards of each
manufactured unit is ensured by implementation of internal
documented procedures.
Declaration of Conformity (laser performance)
This is to certify that 3D scanner model
Trimble TX8
complies with the performance requirements of
IEC 60825-1
(1)
and
US FDA 21 CFR §1040.10
(2)
as a Class 1 laser device.
(1)
IEC 60825-1: 2007 Edition 2.0. Safety of laser products - Part
1: Equipment classification and requirements. IEC, Geneva.
(2)
Federal Performance Standard for Laser Products, 21 §CFR
1040.10, Center for Devices and Radiological Health, Silver
Springs, Maryland, USA.
Trimble TX8 3D Laser Scanner User Guide 3