Triumph Trident 2023 - Page 135

MAINTENANCE AND ADJUSTMENT
135
▼ Using a suitable funnel, fill the engine
with a fully or semi synthetic 10W/40
or 10W/50 motorcycle engine oil
which meets specification API SN (or
higher) and JASO MA2. Triumph
Performance fully synthetic engine
oil is recommended.
NOTICE
The engine oil grade specified must be
used.
Using the incorrect engine oil grade
may result in engine damage.
▼ Start the engine and allow it to idle
for a minimum of 30 seconds.
NOTICE
Raising the engine speed above idle
before the oil reaches all parts of the
engine can cause engine damage or
seizure.
Only raise engine speed after running
the engine for 30 seconds to allow the
oil to circulate fully.
▼ Make sure that the low oil pressure
warning light remains off and the oil
pressure message is not shown in
the instrument display screen.
NOTICE
If the engine oil pressure is too low,
the low oil pressure warning light will
illuminate.
If the low oil pressure indicator
remains on, stop the engine
immediately and investigate the
situation.
Running the engine with low oil
pressure will cause severe engine
damage.
▼ Stop the engine and recheck the oil
level. Adjust if necessary.
▼ For Daytona 660 fit the left hand
fairing, see page96.