MAINTENANCE AND ADJUSTMENT
159
▼ Slide the rubber cover over the lock
nut.
1. Mirror arm
2. Rubber cover
3. Lock nut
4. Mirror boss
Daytona660
▼ Move the mirror arm forwards or
rearwards to give rear visibility in the
riding position
1. Mirror arm
Steering/Wheel Bearings
WARNING
To prevent risk of injury from the
motorcycle falling during the
inspection, make sure that the
motorcycle is stabilised and secured
on a suitable support.
When inspecting steering and wheel
bearings, do not exert extreme force
against each wheel or rock each wheel
vigorously as this may cause the
motorcycle to become unstable and
fall from its support.
Failure to follow the advice above
could result in motorcycle damage,
serious injury or death.
To Next Page
Loading...
