MAINTENANCE AND ADJUSTMENT
167
Tyres
This model is fitted with tubeless tyres,
valves and wheel rims. Use only tyres
marked ‘TUBELESS’ and tubeless valves
on rims marked ‘SUITABLE FOR
TUBELESS TYRES’.
WARNING
Do not install tube type tyres on
tubeless rims. The bead will not seat
and the tyres could slip on the rims,
causing rapid tyre deflation.
Never install an inner tube inside a
tubeless tyre without the appropriate
marking. This will cause friction inside
the tyre and the resulting heat build-
up may cause the tube to burst
resulting in rapid tyre deflation.
Failure to follow the advice above may
lead to loss of motorcycle control
which could result in serious injury or
death.
Typical Tyre Marking - Tubeless Tyre
Typical Wheel Marking - Tubeless Tyre
To Next Page
Loading...
