GENERAL INFORMATION
96
NOTICE
Note the routing of the direction
indicator harness for installation.
▼ Disconnect the direction indicator
from the main harness.
1. Direction indicator connectors
▼ Remove the fairing.
Fairings - Installation
Daytona660 Only
WARNING
Make sure the motorcycle is stabilised
and adequately supported.
Do not support the motorcycle on any
ancillary component, the exhaust
system or any other non structural
parts of the motorcycle frame.
A correctly supported motorcycle will
help prevent it from falling.
An unstable motorcycle may fall
resulting in motorcycle damage,
serious injury or death.
▼ Route the direction indicator harness
as noted for removal and connect to
the main harness.
NOTICE
Before fitting the fairing, make sure
the grommet is fitted to the retaining
bracket.
While fitting the fairing, make sure the
fairing top bracket is located above
the fuel tank infill panel.
To Next Page
Loading...
