APPROVAL INFORMATION
234
This section contains approval information that is required to be included in this
Owner's Handbook.
Radio Equipment Device EU Directive 2014/53
Triumph motorcycles are equipped with a range of radio equipment devices. These
radio equipment devices must comply with the EU Radio Equipment Device
Directive2014/53/EU. The complete text of the EU declaration of conformity for each
radio equipment device is available at the following address:
www.triumphmotorcycles.co.uk/public-content/triumph-radio-device-approvals
The table below shows the frequencies and power levels for the radio equipment
devices in compliance with the EU Directive 2014/53/EU. The table shows all radio
equipment devices used across the Triumph range of motorcycles. Only certain radio
equipment devices in the table are applicable to specific motorcycles.
Radio Equipment Device Frequency Range
Maximum
Transmit Power
Level
Manufacturer
Chassis Control Unit
Receive Bands: 433.92MHz,
134.2kHz
Category-2 Receiver
Transmit Bands: 134.2kHz
Class 1 Transmitter Fixed
Inductive Loop Coil Antenna
287nWERP
Pektron
Alfreton Road,
Derby, DE21 4AP
UK
Keyless Control Unit
Receive Bands: 433.92MHz,
134.2kHz
Category-2 Receiver
Transmit Bands: 134.2kHz
Class 1 Transmitter Fixed
Inductive Loop Coil Antenna
6.28uWERP
Keyless Control Unit 2
Receive Bands: 433.92MHz,
134.2kHz
Category-2 Receiver
Transmit Bands: 134.2kHz
Class 1 Transmitter Fixed
Inductive Loop Coil Antennas
3.01uWERP
Keyless System Key Fob
Receive Bands: 134.2kHz
Category-2 Receiver
Transmit Bands: 433.92MHz,
134.2kHz
Class: N/A Antenna Type
Fixed Antenna (PCB)
0.019mWERP