INSTRUMENTS
64
Trip Setup Menu
The Trip Setup menu allows the
configuration of the trip meters.
To access the Trip Setup menu:
▼ From the Main Menu, press the Up/
Down button to select Trip Setup.
▼ Press the Right button to view the
available options.
Trip 1 Reset
Trip 2 Reset
Trip 2 Display
Selecting Trip 1 Reset or Trip 2 Reset
allows the relevant trip meter to be
configured manually or automatically.
The trip meter set up procedure is the
same for both trip meters.
Manual reset will only reset the selected
trip meter when the rider manually
chooses to reset it. For more
information, see page64.
Automatic reset will reset each trip
meter after the ignition has been
switched off for a set time. For more
information, see page65.
Trip meter 2 can be enabled or disabled.
For more information, see page65.
Trip Setup - Manual Reset
To set the trip meter to reset manually:
▼ From the Trip Setup menu, press the
Up/Down button to select Trip 1
Reset or Trip 2 Reset.
▼ Press the Up/Down button to select
Manual.
▼ Press the Right button to view the
available options.
▼ Select the required option and press
the Select button to confirm.
Reset now and cont.
Continue no reset
There are two options:
▼ Reset now and cont. - Resets all trip
meter data in the relevant trip meter.
▼ Continue no reset - Any trip meter
data in the relevant trip meter will
not be reset.
To Next Page
Loading...
