GENERAL INFORMATION
80
Direction Indicator Switch
When the direction indicator switch is
pushed to the left or right, the
corresponding direction indicators will
flash on and off.
The indicators can be cancelled
manually. To manually turn off the
indicators, push and release the
indicator switch in the central position.
For Daytona660 only, when the brakes
are applied for emergency braking, the
rear direction indicators will flash on
and off.
Automatic self cancelling indicators can
be activated in the Bike Set Up function
on the display, refer to page62.
When in automatic self cancelling mode
and the motorcycle stops for any
reason, the indicators will flash for the
remainder of the time and distance
unless manually cancelled by the rider.
MODE Button
When the MODE button is pressed and
released it will activate the riding mode
display. Further presses of the MODE
button will scroll through the available
riding modes (see page50).
Horn Button
When the horn button is pressed, with
the ignition switch turned on, the horn
will sound.
High Beam Button
When the high beam button is pressed
the high beam will be switched on. Each
press of the button will swap between
dip and high beam.
The headlight will function when the
ignition switch is turned to the ON
position. The headlight will go off while
pressing the starter button until the
engine starts.
NOTICE
Daytona 660 only: A position light is
fitted in all markets except America
and Canada.
A lighting on/off switch is not fitted to
this model. The position light, rear light
and licence plate light all function
automatically when the ignition is
turned to the ON position.
A Pass feature is not available on this
model.
To Next Page
Loading...
