MAINTENANCE AND ADJUSTMENT
186
Lights
NOTICE
The use of non-approved bulbs may
result in damage to lenses and other
lighting unit components.
In addition, the use of bulbs of
incorrect wattage may cause the
chassis ECM to cut power to affected
lighting circuits.
Use genuine Triumph supplied bulbs as
specified in the Triumph Parts
Catalogue.
Always have replacement bulbs
installed by a competent person with
the specialist knowledge and technical
understanding of motorcycles, such as
an authorised Triumph dealer.
Headlight(s)
WARNING
Adjust road speed to suit the visibility
and weather conditions in which the
motorcycle is being operated.
Make sure that the headlight beam is
adjusted to illuminate the road surface
sufficiently far ahead without dazzling
oncoming traffic.
An incorrectly adjusted headlight may
impair visibility for oncoming traffic,
leading to an accident which could
result in serious injury or death.
WARNING
Never attempt to adjust a headlight
beam when the motorcycle is in
motion.
Any attempt to adjust a headlight
beam when the motorcycle is in
motion may lead to loss of motorcycle
control.
Failure to follow the advice above
could result in serious injury or death.
To Next Page
Loading...
