GENERAL INFORMATION
93
Passenger Seat
▼ Engage the seat tongue with the
seat tongue locating position on the
motorcycle.
▼ Align the seat lock peg to the lock
and press down, engaging the seat
lock. An audible click can be heard
when the seat is fully engaged in its
lock.
1. Passenger seat
2. Seat lock peg
3. Seat lock
4. Seat tongue
5. Seat tongue locating position
WARNING
To prevent detachment of the seat
during riding, after fitting always
grasp the seat and pull firmly
upwards.
If the seat is not correctly secured in
the lock, it will detach from the lock.
A loose or detached seat may lead to
loss of motorcycle control which could
result in serious injury or death.
▼ Grasp the seat and pull firmly
upwards to ensure that it is securely
retained.
Fairings
NOTICE
To prevent damage to the fairings,
care must be taken not to drop or lean
a fairing against any surface which
may damage the fairing.
Put the fairing on a clean, flat surface
which is covered with a soft cloth.
Do not place any item on the fairing
which may cause damage.
Fairings - Removal
Daytona660 Only
WARNING
Make sure the motorcycle is stabilised
and adequately supported.
Do not support the motorcycle on any
ancillary component, the exhaust
system or any other non structural
parts of the motorcycle frame.
A correctly supported motorcycle will
help prevent it from falling.
An unstable motorcycle may fall
resulting in motorcycle damage,
serious injury or death.
NOTICE
Only the left hand fairing needs to be
removed to change the engine oil and
oil filter.
To Next Page
Loading...
