INSTRUMENTS
63
Bike Setup - Traction Control (TC)
The Traction Control (TC) system can be
temporarily disabled. The Traction
Control (TC) system cannot be
permanently disabled, it will be
automatically enabled when the ignition
is turned off and then on again.
To enable or disable the TC system:
▼ From the Bike Setup menu, press the
Up/Down button to select TC.
▼ Press the Right button to view the
available options.
▼ Press the Up/Down button to select
Enabled or Disabled.
▼ Press the Select button to confirm. A
tick is shown to indicate the selected
option.
Bike Setup - Service
The service interval is set to a distance
and/or time period.
To review the service interval:
▼ From the Bike Setup menu, press the
Up/Down button to select Service.
▼ Press the Right button to view the
Service information.
To Next Page
Loading...
