MAINTENANCE AND ADJUSTMENT
162
▼ Position the motorcycle on level
ground, in an upright position.
▼ Raise the front wheel off the ground
and support the motorcycle.
▼ Standing at the side of the
motorcycle, gently rock the top of
the front wheel from side to side.
▼ If any free play can be detected in
the wheel bearings, the wheel
bearings must be inspected and
replaced by a competent person with
the specialist knowledge and
technical understanding of
motorcycles, such as an authorised
Triumph dealer.
▼ Reposition the suitable stand and
repeat the procedure for the rear
wheel.
▼ Remove the support and place the
motorcycle on the side stand.
Suspension
Front Suspension
The front suspension is not adjustable.
Front Fork Inspection
WARNING
Never neglect front fork maintenance.
Check the front forks in accordance
with scheduled maintenance
requirements and make adjustments
or replace as necessary.
Scheduled maintenance must be
carried out by a competent person
with the specialist knowledge and
technical understanding of
motorcycles, such as an authorised
Triumph dealer.
Riding with defective or damaged
suspension components is dangerous
and may lead to loss of motorcycle
control which could result in serious
injury or death.
To Next Page
Loading...
