MAINTENANCE AND ADJUSTMENT
143
Clutch Adjustment
To adjust the clutch:
Clutch Lever Adjustment
▼ Loosen the adjuster lock nut.
▼ Turn the adjuster sleeve to give 2 - 3
mm of free play.
▼ Tighten the adjuster lock nut.
1. Adjuster sleeve (lock nut fully released)
2. Clearance
3. Clutch lever
NOTICE
If correct adjustment cannot be made
using the lever adjuster, use the cable
adjuster at the lower end of the cable.
Clutch Cable Adjustment at the Clutch
End
▼ Loosen the adjuster lock nut at the
clutch lever.
▼ Turn the adjuster sleeve fully into
the clutch lever housing then turn
back two complete turns.
▼ Tighten the adjuster lock nut at the
clutch lever.
▼ If the clutch cable is tight, loosen the
front lock nut (2) and tighten the
rear lock nut (1) to give 2 - 3 mm of
free play at the clutch lever.
▼ If the clutch cable is loose, loosen the
rear lock nut (1) and tighten the front
lock nut (2) to give 2 - 3 mm of free
play at the clutch lever.
▼ Tighten the lock nuts to 3.5 Nm.
1. Rear adjuster lock nut
2. Front adjuster lock nut
3. Clutch outer cable
▼ Check that there is 2 - 3 mm clutch
lever free play at the lever. Adjust at
the clutch lever end if required.