Triumph Trident 2023 - Page 97

GENERAL INFORMATION
97
▼ Slide the fairing rearwards to attach
the locating feature onto its
retaining bracket.
2
1
TP0415
3
1. Fairing locating feature
2. Retaining bracket
3. Grommet
▼ Attach the fairing to the fuel tank
infill panel.
▼ Attach the fairing to the cockpit.
▼ Fit the fixing to the rear of the
fairing. Do not tighten at this stage.
2
1
TP0408
3
4
1. Retaining clips location (cockpit)
2. Retaining grommet location (fuel tank infill
panel)
3. Fixing
4. Retaining bracket
▼ Fit the two lower fixings securing the
fairing lower halves to each other
and tighten to 3 Nm.
▼ Fit the upper fixing securing the
lower infill panel to the fairing and
tighten to 3 Nm.
▼ Fit the push release plastic rivet.
3
2
TP0410
4
1
1. Lower infill panel
2. Upper fixing
3. Push release plastic rivet
4. Lower fixings
▼ Fit the fixing securing the fairing to
the centre infill panel and tighten to
3 Nm.
1
TP0411
2
1. Centre infill panel
2. Fixing