ENTER/START. The gauge sets the time and returns to the
Clock/Calendar menu.
CHANGE DATE
To change the date, press 2 at the Clock/Calendar menu.
The gauge displays:
(Note that in this example, the time is displayed in mm/dd/yyyy
format. To change the date format, refer to the Date Format
section below.)
To accept the displayed date, press ENTER/START. To change
the date, use the numeric keys to enter the new date. When
finished, press ENTER/START. The gauge sets the date and
returns to the Clock/Calendar menu.
TIME FORMAT
The gauge can display the time in either AM/PM or 24-hour
format. To select the desired time format, press 3 at the
Clock/Calendar menu. The gauge displays:
Use the numeric keys to select the desired time format. The
gauge sets the time format and returns to the Clock/Calendar
menu.
To Next Page
Loading...
