Troxler EGauge Combo 4540 User Manual

6–2
 To set a new Gmb target value, press 5. Enter the new
Gmb target value and press ENTER. After entering the
value, the gauge prompts you to store the value for
later use. Select YES or NO
► To set a new Gmm target value, press 5. Enter the
new Gmm target value and press ENTER. After
entering the value, the gauge prompts you to store
the value for later use. Select YES or NO
Gmb: 130.0 pcf
Do You Want to Save
This Value for Later Use?
Gmm: 0.0 pcf
1. 0.0 2. 0.0
3. 0.0 4. 0.0
5. New 6. Disable
Gmb Target
135 pcf
Press <ENTER>
6-4
Gmb: 0.0 pcf
1. 0.0 2. 0.0
3. 0.0 4. 0.0
5. New 6. Disable
Gmb Target
130 pcf
Press <ENTER>

Troxler EGauge Combo 4540 Specifications

General

Brand	Troxler
Model	EGauge Combo 4540
Category	Measuring Instruments
Language	English