SAFETY-vi
Orig
CD373
Safety MZ Tow Tractor
33. Always deflate a tire and wheel assembly prior to removing it for servicing or dismounting.
34. Do not use wheels or wheel components that are cracked, bent pitted or corroded. Ensure
that all wheel components are of the same type and size, and that wheel size and tire size
match. Inspect all components carefully prior to use.
35. Do not attempt to seat a tire bead or side or lock ring by using inflation pressure or any
flammable or explosive substance such as starting fluid or ether. Never inflate a tire beyond
40 psi to seat tire beads.
36. Do not hammer, pry or weld on or near an inflated or partially inflated wheel and tire
assembly.
37. Do not rework, weld, heat or braze any wheel parts for any reason.
38. Always use a safety cage or other restraining device and a clip-on air chuck with a remote
valve and pressure gauge when inflating a tire. Insure the tire and wheel assembly is properly
assembled prior to inflating it. Visually inspect it for proper seating of beads or sides or lock
rings prior to removing it from the cage.
39. Do not add air to a tire that has been in service with less than 80% pressure without first
fully deflating, removing, disassembling and inspecting the tire assembly for damage.
To Next Page
Loading...
