D301087 0308 - BL20 CANopen 4-165
I/O-Module Objects
4
Parameter - BL20-1RS232
Table 105:
Parameters
BL20-1RS×××
A Default settings
Parameter Value/ Meaning
DisableDiagnostics 0 = Diagnostics activated
1 = Diagnostics deactivated
This controls the separate fieldbus-
specific diagnostics signal - not the
diagnostics signal embedded in the
process input data (object 5601hex).
Disable
ReducedCtrl
0 = The diagnostics messages are not
part of the process input data (object
5601hex). Bytes1 to 7 can therefore
be used for the user data.
1 = The diagnostics messages are
contained in byte 1 of the object
5601hex (irrespective of “DisableDia-
gnostics”). Byte 0 contains the status
and control byte. Bytes 2 to 7 are
available for the user data.
The structure of the object 5602hex is
also changed by this setting. At the
location of the first data byte, byte 1
of the object 5602hex contains a byte
with two control bits. These can
initiate a clearing of the receive and
transmit buffer.
To Next Page
Loading...
